Guide

Chiller maintenance: what a worthwhile visit includes

A chiller loses efficiency slowly and then fails suddenly. The point of maintenance is to see the slow part while it is still cheap.

Condenser and heat rejection

For an air-cooled chiller, a fouled condenser raises head pressure and pushes everything else out of balance. Cleaning is physical work, not a spray and a nod. For water-cooled plant, the equivalent is water quality and heat exchanger condition, which is where scale quietly builds.

Temperatures, pressures and current

Approach temperature, suction and discharge pressures, superheat and compressor current together tell you whether the machine is healthy. A single reading proves very little. The value comes from comparing this visit's numbers with the last one, which is why a written record matters.

Flow, glycol and controls

Low flow, a failing pump, weak glycol or a control setpoint that has drifted will all produce a chiller that runs but does not cool properly. Safety devices should be tested rather than assumed, and alarms should mean something to whoever is on site at 6am.

In short

  • Condenser condition decides more efficiency than any setting.
  • Compare readings visit to visit, not just against the setpoint.
  • Flow, glycol and controls belong on the checklist.

Want this looked at properly?

Call, WhatsApp a photo of the unit, or send the form and we will come back with a written scope.